Total Pageviews

Thursday, January 20, 2011

Deck Seams. 39 hrs

I have removed all the wires and temporary forms from the deck. Last night I filletted the seams with thickened epoxy and laid the fiberglass tape in place. I'll wet-out the fiberglass today with resin.
I have a couple wires and a strap holding the deck in the proper shape, its not rigid at all with the forms removed and the straps will help hold it the shape it needs to be to match up with the hull. It doesnt look like it but the strap is tensioned just enough to pull the sides in about 1".
The hull is ready to sand the fiberglass tape edges then encapsulate the entire interior in resin and install the cockpit fiberglass.

No comments:

Post a Comment